Industrial Fumes Systems, Certified Gas Equipment, Commercial Arsine Equipment, Maintenance Free C5F8 BCl3 CH2F2 CH3F Leak detection, Intrinsically Safe Fume Detector

Hazardous Gas Analyzers

We Manufacture a full range of Gas Analyzers and Detectors such as Industrial Fumes Systems

Our sensors, detectors and analyzers are used in the following applications: Water Treatment Plants, Employee Exposure Monitoring, Boiler Rooms, Parking Garages, Plants, Medical Facilities, Power Plants, Control Rooms, Processing Plants, Extreme Conditions, Petrochemical Industy, Fertilizer Industry, Pressurized Pipes, Semiconductor Industry, Industry, Compost Facilities, Indoors, LNG LPG Storage Or Pumping Facilities, Wastewater Treatment Facilities, Gas Treating Plants

Get Live Answers Now!

Toxic Gas Leak Detectors

Gas Detection Specialists

We have over a quarter-century of hands-on experience engineering, designing, installing, and maintaining toxic and explosive gas detection systems. Our detectors work for years – even decades – to safeguard your company and your customers from the dangers of toxic and explosive gases.

We’ve worked with hundreds of companies all over the world. Now we’d like to work with you!

For complete information call
1-800-285-3651
or visit our main Gas Detectors information site.

Featured Gas Analyzer Products

explosion proof, fast response time, frequent calibrations are not required, gas free calibration, heated optical chamber, immune to poisoning and etching, industry standard 4-20 ma output, inexpensive non-display units available, infrared sensing technology, interchangeable sensors for oxygen & toxic gases, intrinsically safe and explosion proof, io-base-t/100 base - tx ethernet port, led display, linear output, long life electrochemical sensors, low cost, low power consumption, low-cost installation, multi port housing for easy installation, multi-beam sensing technology
retains operating and calibration settings, rs485 modbus rtu communcations, self-check system, self-compensating optical bench (patented), self-compensating optical system (patented), sensor self-check system, simple calibration, stand alone gas detector with 4-20 ma output, straight optical path eliminates the need for reflective surfaces, temperature compensated sensor
sih2cl2, si2h6, h202, dichlorosilane (dcs), eo, eto, f2, geh4, h2, h20, h2s, h2se, hcl, hcn, hf, lel, nh3, no2, lng, lpg, nf3, sf6, ticl4, so2, h2s, c3h6, o2, o3, ph3, sih4, so2, voc, vol
SEC MILLENIUM INFRARED HYDROCARBON GAS DETECTOR
A stand-alone infrared point combustible gas detector, constructed of 316 stainless steel it is explosion proof certified with an industry standard 4-20 mA analog output.
SEC ETHYLENE OXIDE STERILIZATION MONITOR
Checks correlates and controls ethylene oxide concentrations inside sterilization chambers during entire cycle. Units can also measure EtO plus H2O levels from initial surge to shutdown.
SEC 4850 REPEATER
A data highway booster used to increase the capabilities of the Sensor Electronics data highway.
SEC 3000 SMART GAS SENSOR
An intelligent stand-alone gas detector. The removable smart sensors can be changed out or replaced in the field. The 4-20 mA signal generated by the SEC 3000 can be connected to existing controllers, PLCs, DCS and TMR systems.

Industrial Fumes Systems Uses

Items Related to Industrial Fumes Systems

Gas Wells, Mines, Turkey Farms, Paint Industry, Marine / Shipping Industry, Wastewater Treatment Facilities, Compressor Stations, Harsh Conditions, Indoors, Nuclear Industry, Underground, Compost Facilities, Risk Management, Buildings, Hazardous Material Storage, Bus Terminals, Agriculture Industry, Chemical Plants, Confined Spaces, HVAC Equipment

Our Gas Detection Products offer these features:

    Simple Calibration
    Time Stamped Data Logging Memory Stick
    Non-intrusive Programming
    Over 80 Different Gases Detected
    Compact Low Cost Design
    IO-Base-T/100 Base - TX Ethernet Port
    Gas Free Calibration
    Self-check System
    Operates In Anaerobic Atmospheres
    Immune To Poisoning And Etching
    Industry Standard 4-20 MA Output
    Low Cost
    Alarm And Fault Relays
    "Hot Swap" Sensor
    Non-intrusive Calibration
    Interchangeable Sensors For Oxygen & Toxic Gases
    Fast Response Time
    Accuracy In Low Temperature Applications
    Provides Continuous Self-diagnostics
    Straight Optical Path Eliminates The Need For Reflective Surfaces

Industrial Fumes Systems, Certified O2 O3 PH3 SIH4 SO2 VOC VOL Systems, Maintenance Free Hydrogen Chloride Dectectors, Low-Cost Diborane Leak detection, Industrial Silicon Tetrachloride Alarms, Industrial Acetylene Leak detection, Hazardous Arsine Detector, Approved Hydrogen Dectectors, Commercial Hydrogen Peroxide Monitoring, Weatherproof Hydrogen Fluoride Sensors, Performance Approved Nitric Oxide Dectectors, Industrial Fumes Systems, Industrial Vapour Analyzers, Commercial Methane Instruments, Certified B2H6 HF AsH3 GeH4 BF3 CH3SH Monitors, Weatherproof ASH3 B2H6 BR2 CH4 CH20 C2H2 Detector, No-Gas Calibration Hydrogen Chloride Instruments, Hazardous Boron Trifluoride Instruments, Approved Propane Equipment, Approved ASH3 B2H6 BR2 CH4 CH20 C2H2 Systems, Hazardous Dichlorosilane DCS Equipment, No-Gas Calibration Nitrogen Trifluoride Instruments, Weatherproof Hydrogen Bromide Systems, Performance Approved LNG LPG Detection, Industrial Fumes Systems

More products:

 
Industrial Fumes Systems, Industrial Fume Analyzers, Low-Cost Difluoromethane Leak detection
.....
Contact Us About Commercial Vapour Instruments, Certified Vapour Analyzers, Performance Approved Catalytic Equipment, Performance Approved Hazardous Gas Monitoring, Industrial Fumes Systems